New Ruabon Cladding Tiles

A natural addition to the extensive Ruabon range of Welsh clay products is the new Cladding Tile. Developed specifically for the requirements of cladding systems manufacturers and installers, it is fast becoming the number one choice for panel, archway and pre-fabricated chimney applications.

Manufactured to exacting floor tile standards it far exceeds the technical specifications of similarly priced brick slips. Available in full and half brick modular sizes of 215 x 65 x 15mm and 102.5 x 65 x 15mm in a range of natural earthtone shades. Mitred tiles are also available for corner applications.

Each tile is fully frost resistant with very low water absorption and highly resistant to staining. Compressive strength exceeds 140N/mm and tiles exhibit exceptional durability with remarkable resistance to deep abrasion.

Edges are chamfered on all four sides with no sharp or ragged edges, to provide a superior finish and ease of fixing and finishing of joints.

Accurate dimensions give regular and even spacing of units and fixing ribs on the reverse side ensure secure and permanent adhesion.

Ruabon cladding tiles are manufactured from the highest quality Etruria Marl clay and will not fade or discolour.

With negligible thermal and moisture expansion they are designed to withstand the most extreme climatic conditions.

For further information, please contact our Customer Services Department using the contact page. Full technical data on the Cladding Tiles is available in a downloadable Acrobat file on the Technical data sheets page (registration is requested for new users).

Due to limitations of the printing process, actual tile colours may vary from those shown. Final selection should be made from actual product samples.

Top of Page | Jump to Main Navigation Bar

© 2010 Dennis Ruabon Tiles Ltd – all rights reserved